| Order
Online About
Accushim Shim
Products
V180
Laser System has been replaced with Shaft Hog
CLICK BELOW
SHAFT
HOG LASER Shaft Alignment System
Belt
Hog
LASER Pulley Alignment Tool
REACT
Brand Complete Shaft Alignment System
REACT
Brand Starter Shaft Alignment Kits
SIDE
ALIGN Horizontal Move Kits
SAT
Shaft/Coupling Alignment Trainer
PAT
Pulley
Belt Alignment
Trainer
Request
Information
Contact
Us
Home
Page
|
|
REACT
Brand Starter Shaft Alignment Kits
The REACT
Brand Shaft Alignment Starter Kits are
designed for alignments
on smaller installations, with shafts under 3-1/2 inches in diameter.
 |
|
Broken Coupling
Starter Kit, SK-1
A hardware kit
designed to take face and rim readings directly off one of the
coupling halves when the coupling is partially disassembled. The
kit contains all needed mounting hardware, with dial indicator
clamps, two different length support rods, and a case.
US
$395.00 without dial indicators CLICK
HERE TO BUY NOW
US $495.00 with dial indicators
CLICK
HERE TO BUY NOW |
 |
|
Shaft to Shaft
Starter Kit, SK-2
This kit takes
readings shaft to shaft across the coupling, using the same method
one and two approach of the full REACT System.
With the SK-2, there is no need to break the coupling. The kit
contains all needed mounting hardware, with dial indicator clamps,
two different length support rods, and a case.
US
$585.00 without dial indicators
CLICK
HERE TO BUY NOW
US $685.00 with dial indicators
CLICK
HERE TO BUY NOW
|
SK-1
Broken Coupling Starter Kit
A basic stainless steel hardware set for taking
readings off the coupling rim and face.
Contains the following: |
| Part
# |
Quantity |
Description |
| RA
- 6 |
1 |
6"
wide bracket base |
| CH
- 10 |
1 |
10"
long bracket base chain |
| RC
- 3 |
2 |
5/8"
jam nuts |
| RC
- 4 |
2 |
1/4"
jam nuts |
| RD
- 2 |
1 |
5/8"
threaded rod |
| RD
- 5 |
1 |
Target
post/Rod holder |
| MC
- 1 |
3 |
Indicator
clamps |
| RG
- 3 |
1 |
3"
adapter rod, 3/8" to 5/16" diameter, Plain |
| RG
- 4 |
1 |
4"
indicator rod, 5/16" diameter, Threaded |
| RG
- 6 |
1 |
6"
indicator rod, 5/16" diameter, Threaded |
|
SK-2
Shaft to Shaft Starter Kit
A basic stainless steel hardware set for taking
readings from shaft to shaft, over the coupling.
Contains the following: |
| Part
# |
Quantity |
Description |
| RA
- 6 |
2 |
6"
wide bracket base |
| CH
- 10 |
2 |
10"
long bracket base chain |
| RC
- 3 |
4 |
5/8"
jam nuts |
| RC
- 4 |
2 |
1/4"
jam nuts |
| RD
- 2 |
2 |
5/8"
threaded rod |
| RD
- 5 |
2 |
Target
post/Rod holder |
| MC
- 1 |
3 |
Indicator
clamps |
| RG
- 3 |
1 |
3"
adapter rod, 3/8" to 5/16" diameter, Plain |
| RG
- 4 |
1 |
4"
indicator rod, 5/16" diameter, Threaded |
| RG
- 6 |
1 |
6"
indicator rod, 5/16" diameter, Threaded |
|
Click
here to view the REACT Brand Complete Shaft Alignment System
|
